iPhone 13 Won't Charge? Here's The Fix!

Colin Boyd

SEPTEMBER 8, 2021

You tried plugging your iPhone 13 in to charge, but nothing happened. Your battery life is going down, and you're not sure what to do. Today, I'll show you how to fix an iPhone 13 that won't charge!

What's Wrong With My iPhone 13?

When an iPhone loses the ability to charge, there are a lot of things that might be behind the problem. The issue could be caused by a software malfunction, faulty hardware, or a problem with your iPhone's charger.

In the following steps, we'll show you how you can test for each of these problems. Once you find the component preventing your iPhone 13 from charging, you'll be well on your way to fixing the problem for good!

How To Repair An iPhone 13 That Won't Charge

7 Steps Total
1.

Hard Reset Your iPhone

A hard reset is usually a temporary solution to a software problem. It doesn't change anything at all — it just forces your iPhone to start from scratch, and often times the problem comes back.

How Do I Hard Reset My iPhone?

  1. Press and hold the power button and the volume down button together until the screen goes blank and the Apple logo appears on the screen.
  2. When the Apple logo reappears, let go of both buttons.
  3. When your iPhone turns back on, the hard reset is complete.

Hard Reset On iPhone X or Newer

Hard reseting an iPhone X is slightly different than other models of the iPhone.

  1. Quickly press the volume up button.
  2. Quickly press the volume down button.
  3. Press and hold down the Side button.
  4. Release the Side button when the Apple logo appears on the center of the screen.
View More
2.

Inspect Your iPhone Cable (Lightning Cable)

Damaged Lightning cables are a common reason for iPhone problems, especially related to charging and transferring data between iPhones and computers.

Lightning cables can be tricky to diagnose because when they start to go, they usually don't break all at once. Sometimes an iPhone will continue to charge but won't sync data properly, or vice versa, because of the construction of the cable. Make sure to take a close look while you're troubleshooting!

How Do I Inspect My iPhone Cable (Lightning Cable)?

  1. Use a flashlight and look closely at both ends of your Lightning cable. These cables can become worn and tend to fray, especially at the end with the Lightning connector.
  2. If you see no visible signs of damage, try charging your device using both a USB port on a computer and the wall adapter which came with your iPhone. If your Lightning cable works with one, but not the other, then your cable is not the problem.
  3. Try charging your device with a friend's or family member's Lightning cable. If their cable works while yours doesn't, then you've identified that the problem is your Lightning cable.
View More
3.

Inspect Your iPhone Charger

There are many different ways to charge your iPhone — plugging it into your laptop, wall adapter, car charger, and more. As a precautionary measure, the software of your iPhone will prevent charging if it detects fluctuations from the power source.

How Do I Inspect My iPhone Charger?

  1. Charge your iPhone with multiple different power sources. If you normally use your wall charger, try using a USB port on your laptop, and vice versa.
  2. If your iPhone charges with one power source but not the other, then you know that the charger is causing your problem.
View More
4.

Inspect Your iPhone's Charging Port (Lightning Port)

You should frequently inspect your Lightning port, also known as the charging port, to make sure it is clean. Lint, gunk, and other debris can prevent your Lightning port from making a solid connection with your Lightning cable. A clogged Lightning port could also "trick" newer iPhones (without headphone jacks) intro thinking headphones are connected. This could lead your iPhone to get stuck in headphones mode.

How Do I Inspect My iPhone's Charging Port (Lightning Port)?

  1. Use a flashlight to see if there is lint, gunk, or any other debris in your iPhone's Lightning port.
  2. If you find debris in your iPhone's Lightning port, gently brush it out with a new toothbrush or anti-static brush.
View More
5.

Back Up Your iPhone

It's important to back up your iPhone before doing any major restores (such as a DFU restore). If something goes wrong while you're trying to fix your iPhone, having a back up means you won't lose any of your data (such as contacts, photos, apps, and more). Restoring from a back up is a lot more convenient than having to go and reenter all the information that was saved on your iPhone.

How Do I Back Up My iPhone?

There are a few different ways to back up your iPhone:

Backup Your iPhone Using iCloud

  1. If you have a WiFi connection, you can back up your iPhone using iCloud.
  2. Open the Settings app.
  3. Tap on Your Name at the top of the screen.
  4. Tap iCloud.
  5. Scroll down and tap on iCloud Backup.
  6. Make sure the switch next to iCloud Backup is on. You'll know the switch is on when the switch is green.
  7. Tap Back Up Now.
  8. A status bar will appear to tell you how much time is remaining.

Backup Your iPhone Using iTunes

  1. Plug the Lightning connector on your Lightning cable (charging cable) into the Lightning port on your iPhone.
  2. Plug the other end of your Lightning cable into a USB port on your computer.
  3. Open iTunes on your computer.
  4. Click on the iPhone icon in the upper left hand corner of iTunes.
  5. Click the circle next to "iCloud" or "This computer" to select whether you want to backup your iPhone to iCloud or your computer.
  6. Click Back Up Now to backup your iPhone.
  7. When the backup is complete, you'll see the time and date updated under Latest Backup.

Backup Your iPhone Using Finder (Macs Running Catalina 10.15 or newer)

  1. Connect your iPhone to your Mac using a charging cable.
  2. Open Finder.
  3. Click on your iPhone under Locations.
  4. Click the circle next to Back up all of the data on your iPhone to this Mac.
  5. Click Back Up Now.
  6. When the backup is complete, you'll see the time and date updated under Latest Backup.
View More
6.

Put Your iPhone In DFU Mode

A DFU restore is the last troubleshooting step you can take to rule out a software problem on your iPhone.

Watch our step-by-step DFU restore guide on YouTube, or follow the steps below:

  1. Plug your iPhone in a computer.
  2. Open iTunes (on PCs or Macs running macOS Mojave 10.14 or earlier) or Finder (Macs running macOS Catalina 10.15 or newer).
  3. Press and release the volume up button.
  4. Press and release the volume down button.
  5. Press and hold the side button until your iPhone's display goes black.
  6. When the screen turns black, press and hold the volume down button while continuing to hold the side button.
  7. Hold both buttons for five seconds.
  8. After five seconds, release the side button, but continue to hold the volume down button.
  9. Release the volume down button when your iPhone appears in iTunes or Finder.
  10. Your iPhone appears in iTunes or Finder, it's in DFU mode!
  11. Click Restore and follow the on-screen prompts to DFU restore your iPhone.
View More
7.

Repair Your iPhone With Apple

Apple repairs iPhones at the Genius Bar in Apple Stores and through their online mail-in repair service. Apple repairs are high-quality, but out-of-warranty repairs can be much more expensive than third-party solutions. If you're looking to save some money you're not covered by Apple's warranty, you may want to check out our other recommendations.

How Do I Repair My iPhone With Apple?

How To Repair Your iPhone With Apple's Mail-In Service

  1. Visit Apple's support website to begin the online mail-in repair process.
  2. Alternatively, call 1-800-MY-APPLE (1-800-692-7753) to set up a repair.

How To Repair Your iPhone At The Genius Bar Inside Your Local Apple Store

  1. Visit Apple's website to make a Genius Bar appointment before you go into the store. Apple Stores are extremely busy, and if you don't have an appointment, you may have to wait for hours or end up being turned away. (Editor's note: I'm a former Apple tech and we're not exaggerating — please, do yourself a favor and make an appointment first!)
  2. When you arrive, go to the Genius Bar to check in for your appointment.
  3. Genius Bar appointments always include free diagnosis. If you're under warranty, many repairs can be done on the spot, but it all depends upon which parts are in stock. If you're not under warranty, the Genius will give you a quote for the cost of a repair.
View More

iPhone 13: Powered Up!

When an iPhone loses the ability to charge, trying to find the fix can get pretty scary. Hopefully, your iPhone 13 is now charging normally and you'll know exactly what to do the next time you run into this problem. If you found this article helpful, let us know in the comments and be sure to share it with your friends!

AUTHOR

Colin Boyd

I'm Colin, the Creative Coordinator for Payette Forward.

Subscribe
Notify of
guest
7 Comments
Inline Feedbacks
View all comments
Tealia
Tealia
7 months ago

We have a new iphone 13 and it is only charging thru the mac charging power point and card not through anything else?

Micah
Micah
9 months ago

You could always use a wireless charger. If not permanently it could at least be a temporary fix.

Steve Fiat
Steve Fiat
9 months ago

I was having the same problem with my iPhone 13. It turns out the new charging cube that came with the new iPhone is the culprit. I’m using the old style charging cube now and it charges just fine to 100%.

terrance edward webb
terrance edward webb
11 months ago

my i phone 13 wont charge

bonnie
bonnie
1 year ago

trying to get iphone 13 to charge, will not turn on, cleaned port, used several different charges in different locations, bought new charges, etc. what do I do?

nigger
nigger
9 months ago
Reply to  bonnie

gotta repair the charge port my friend

nigger
nigger
9 months ago
Reply to  bonnie

looks like you gotta replace that charger port my friend