My 1st Generation Apple Pencil Won’t Pair! Here’s The Fix.

Tracking down an issue in your iPad’s Bluetooth, VPN, or Wi-Fi settings can be incredibly difficult. Rather than trying to finding it, we’ll completely reset all of the network settings to attempt to erase the corrupt file or setting causing your iPad’s problem.

1. Open the Settings app.
2. Tap General.
3. Scroll down and tap Transfer Or Reset iPad.
4. Tap Reset.
5. Tap Reset Network Settings.
6. Enter your iPad passcode.
7. Tap Reset when the confirmation alert appears.
8. Your iPad will reset network settings and restart.

Apple Pencil tips are not invincible. In fact, they’re made to be replaced.

If you find that the tip of your Apple Pencil is wearing out or damaged, don’t panic! Replacing an Apple Pencil tip is a pretty affordable fix, and it doesn’t take too much time either.

1. Purchase a new Apple Pencil tip. Amazon sells them in packs of four for pretty cheap.
2. Grab your current Apple Pencil tip between two fingers and slowly unscrew it from your Apple Pencil’s base.
3. Pick up your replacement tip.
4. Twist your new Apple Pencil tip clockwise until it attaches to the Apple Pencil base securely.

A dirty Apple Pencil can cause problems for more than just your hygiene! Keeping your Apple Pencil 1st Generation clean will keep your device running normally, and helps minimize the likelihood of more serious issues.

If your Apple Pencil is malfunctioning, cleaning it is a great step to take early in the troubleshooting process. The Apple Pencil is pretty fragile, so read all of these steps fully before you begin!

1. Add a small amount of moisture to a lint-free or micofiber cloth.
2. Lightly drag the cloth from one end of the Apple Pencil to the other, starting near the tip.
3. Avoid wiping down the Apple Pencil tip.

If your Apple Pencil was working normally one moment then stopped suddenly, its battery may have died! Luckily, you can charge your Apple Pencil 1st Generation with a standard Lightning Cable easily.

1. Remove the cap from the back of your Apple Pencil 1st Generation.
2. Apply the Apple Pencil Lightning Adaptor to the Lighting Input on the back of your Apple Pencil.
3. Plug a Lightning Cable into any power source.
4. Connect the Lightning Cable to the opposite side of the Apple Pencil Lightning Adaptor.

The tip of the Apple Pencil is not permanently secured to the Apple Pencil’s base. In fact, an Apple Pencil tip is designed to be removed and replaced easily.

If your Apple Pencil isn’t working properly, it’s possible that the tip has come loose from the rest of the device. Making sure that the Apple Pencil tip is fully secured is a quick and easy troubleshooting step for a wide array of malfunctions!

1. Carefully grab the tip of your Apple Pencil with two of your fingers.
2. Twist the tip clockwise slowly to see if it twists. If you try to turn the tip clockwise and it doesn’t move, it is fully attached to the Apple Pencil’s base.
3. If the tip does begin to turn when you try to twist it, continue twisting until it is screwed in place securely.

There are currently two generations of Apple Pencil, and a wide variety of iPad models. Unfortunately, neither Apple Pencil generation is compatible with every iPad.

If you’re experiencing an issue with your Apple Pencil, the problem might be that your iPad is only designed to work with an Apple Pencil 2nd Generation. Checking the compatibility between your iPad and Apple Pencil can save you time and frustration trying to resolve a number of Apple Pencil malfunctions.

1. Make sure you have an Apple Pencil 1st Generation. If the shape of your Apple Pencil is perfectly round, you can be sure it’s a 1st Generation model.
2. Check your iPad model. Visit Apple’s Identify your iPad model to learn how to identify what type of iPad you have.
3. Visit Apple’s Apple Pencil compatibility page to find out if your iPad should work with your Apple Pencil 1st Generation or not.

Bluetooth gives your iPad the ability to connect to Bluetooth devices such as headphones (including Apple AirPods), speakers, keyboards, and more.

1. Open the Settings app on your iPad.
2. Tap Bluetooth.
3. Tap the switch next Bluetooth. You’ll know the switch is on when it is green and positioned to the right.